Cold Tape

Cold Applied Polyethylene Tape

Cold Applied Polyethylene Tape

Specification CTB-Y Width - Backing / Adhesive
Width (mm) 50, 75, 100, 150, 200, 250, 300
Backing (mm)
0.20 ~ 0.80
Adhesive (mm)
0.15 ~ 0.80
Description Performance

  CTB-Y cold applied polyethylene tape is made from a polyethylene backing sandwiched to a layer of proprietary formulation consisting of butyl rubber. The installed product provides outstanding adhesion and elastic properties. It is highly adaptive to forces caused due to changes in temperature and soil stress creep . It has excellent anti-ageing and UV resistance properties. The high tensile strength and elongation of the backing material offers superior mechanical protection .
  It can be used for corrosion protection and repair of pipelines, storage tanks and irregular shapes like flanges, tees, bends, etc.

Guide for application

Applicable Outer Coating Steel, PE, FBE, etc.
Applicable Temperature -20 ~ 60°C
Construction Temperature 5 ~ 50°C
Derust Grade Hand: St3; Machine: Sa2


 CTB installation manual

Property Performance Standard
Basal Tensile Strength 21MPa GB/T 1040.3
Basal Elongation 220% GB/T 1040.3
Electrical Strength 35kV/mm GB/T 1408.1
Volume Resistivity 3.4x1012Ω·m GB/T 1410
Vapour Permeability (24h) 0.18mg/cm2 GB/T 1037
Heat Aging (max. temp.+20°C, 2400h) 85% SY/T 0414
UV Aging Resistance (168h) 92% GB/T 23257
Peel Strength (23°C) to Primer Steel 38N/cm GB/T 2792
to Backing 34N/cm
to Anticorrosion Coating 32N/cm
Water Absorption 0.13% SY/T 0414

服务热线

4001-123-456

微信服务号