Others

FJRD Composite Insulative Tape

FJRD Composite Insulative Tape

  It can be used to protect charged body with any shape to resolve the lack of relative space, it is used for the repair of damaged cable, the middle joint side sealing of power cable and other problems.

Description Performance

Structure

  It is made of the heat shrinkable layer and the bonding layer of low melting point polymer composition.

Performance

  The outer layer shrinks; the inner layer melts when heated to realize seal and insulation integration of a protected charged body.

Installation

  Wind the materials according to 1/2 overlap, the ends can be fixed with simple tape, heat uniformly with the torch from one side to another side until the inner adhesive exuding uniformly along the overlap after shrinkage, form an unity after cooling.

Specifications

Voltage (KV) Thickness (mm) Width (mm) Type Length (m)
6.6 ~ 15 1.0 ~ 1.4 25, 50 C, P 5, 10, 15
20 ~ 27 1.5 ~ 1.8 25, 50 C, P 5, 10, 15
30 ~ 36 2.0 ~ 3.2 25, 50 C, P 5, 10, 15

1. Other sizes can be custom made;
2. Both flame retardant and non-flame retardant are available;
3. Standard colors: RED, YELLOW, GREEN, BLACK.

Property Performance Standard
Electrical
Dielectric Strength 27-30KV/mm GB1048
Breakdown Voltage 42KV/mm GB311
Lightning Impulse 75KV/±10times GB311
Thermal Current 31.5KA GB2706-89
Dynamic Stable Current 80.0KA, Peak GB2706-89
Volume Resistivity 1014Ω·cm GB1044
Permittivity 2.5-3.5 GB1409
Chemical
Oxygen Index ≥ 28 GB1406
Water Absorption ≤ 0.1% GB1406
Low temp. Flexibility (a) Pass GB1034
Corrosion Test (b) Pass  
Physical
Tensile Strength ≥ 14.0 MPa GB1040
Elongation ≥ 400% GB1040
Operating Temperature -55°C~105°C  
Aging Test Pass GB1040

(a) Low temp. flexibility test condition: -55±2°C, 4h
(b) Corrosion test condition: 23±2°C, humidity 95%, 4h

服务热线

4001-123-456

微信服务号