Cold Tape

Cold Applied Polypropylene Tape

Cold Applied Polypropylene Tape

Specification CTB-B Width - Backing / Adhesive
Width (mm) 50, 75, 100, 150, 200, 250, 300
Backing (mm)
0.30 ~ 0.60
Adhesive (mm)
0.70 ~ 1.20
Description Performance

  CTB-B cold applied polypropylene tape consists of a unique polypropylene woven backing, coated with a layer of highly viscous compound, formulated from modified butyl rubber and asphalt. It is used for corrosion protection as well as for mechanical protection of coatings such as cold applied tapes, which do not have such protection.
  It has a high tensile strength, very good impact resistance, excellent aging characteristics. It is UV resistant and non-toxic. It is a versatile product which can be used widely in oil, gas, chemical, water supply and sewerage industries for corrosion protection of pipelines, storage tanks, and irregular shapes. It is particularly useful for below the ground applications. It offers more superior protection, compared to Cold Applied Polyethylene Tape.

Guide for application

Applicable Outer Coating Steel, PE, FBE, etc.
Applicable Temperature -20 ~ 60°C
Construction Temperature 5 ~ 50°C
Derust Grade Hand: St3; Machine: Sa2


 CTB installation manual

Property Performance Standard
Tensile Strength 63MPa GB/T 1040.3
Peel Strength (20°C) to Primer Steel 34N/cm GB/T 2792
to Backing 32N/cm
Dielectric Strength 24kV/mm GB/T 1408.1
Volume Resistivity ≥ 2.31x1012Ω·m GB/T 1410
Vapour Permeability (24h) 0.36mg/cm2 GB/T 1037
Heat Aging (max. temp. +20°C, 2400h) 86% SY/T 0414
UV Aging Resistance (168h) 95% GB/T 23257
Water Absorption 0.24% SY/T 0414

服务热线

4001-123-456

微信服务号