Joint Protection

Pressure Sensitive Adhesive Tape

Pressure Sensitive Adhesive Tape

Guide for specification

Specification
PAS60/80 I.D. - Backing / Adhesive
Pipeline I.D. (mm)
DN100 ~ DN2000
Backing (mm)
0.8 ~ 1.5
Adhesive (mm)
0.7 ~ 2.0
Description Performance

  PAS pressure sensitive adhesive tape can be divided into two types based on its functionality: the anti-corrosion pressure-sensitive adhesive tape (PAS(F)) and the protective pressure-sensitive adhesive tape (PAS(H)).
  PAS consists of a radiation cross-linked modified polyethylene backing, coated with a specially formulated, pressure sensitive, butyl rubber mastic.
  PAS is viscous when cold, has excellent sealing properties and is easy to install. It provides excellent resistance to cathodic disbandment resulting in effective, long-term corrosion protection. No primer or special preparation of the steel surface is needed. The application method is easy even in difficult field conditions.
  PAS can be widely used for pipeline repair and corrosion protection of new pipelines.

img

Guide for application

PAS60
PAS80
Max. Operating Temperature
60°C
85°C
Applicable Outer Coating
PE, FBE, PP or steel
PE, FBE, PP or steel
Preheat Temperature
Ambient Temperature
Ambient Temperature
Derust Grade
St2
St2
Property Performance Standard
Backing Tensile Strength 20MPa GB/T 1040.2
Backing Elongation 576% GB/T 1040.2
Water Absorption 0.012% SY/T 0414
Shear Strength 23°C 0.63MPa GB/T 7124
Tmax 0.083MPa
Impact Strength 15J, no leak GB/T 23257
Peel Strength (cohesion) to anticorrosion coating 23°C 23N/cm GB/T 23257
to anticorrosion coating Tmax 6.4N/cm
to Steel 23°C 25N/cm
to Steel Tmax 5.8N/cm
Cathodic Disbonding 23°C, 28h 5.2mm GB/T 23257
Tmax, 28d 11.3mm
Peel Strength after Hot Water Immersion (50/80°C, 28d) (cohesion) to anticorrosion coating 23°C 28N/cm GB/T 23257
to Steel 23°C 26N/cm

服务热线

4001-123-456

微信服务号