Joint Protection

Heat Shrink Waterproof Cap

Heat Shrink Waterproof Cap

Guide for specification

img

Description Performance

  The outer layer of the heat shrink waterproof cap is a radiation cross-linked polyolefin base layer, with an inner coating of waterproof sealing adhesive. It is primarily used for the ends of insulated and corrosion-resistant steel pipe foam jackets, connecting the outer jacket and inner steel pipe. It serves as a seal, waterproofing, and corrosion protection during the transportation, storage, and use of insulated steel pipes.

Property Performance Standard
Backing
Tensile Strength MPa 19 GB/T 1040
Elongation % 550 GB/T 1040
Vicat Softening Point 96 GB/T 1633
Dielectric Strength MV/m 35 GB/T 1408.1
Volume Resistivity Ω·m 4.0×1015 GB/T 1040
Heat Aging
(150°C, 21d)
Tensile Strength MPa 17 GB/T 1040
Elongation % 450
Hot Melt Adhesive
Softening Point °C 118 GB/T 4507
Shear Strength 23°C MPa 3.4 GB/T 7124
Shear Strength Tmax °C MPa 0.09 GB/T 7124
Peel Strength
23°C N/cm
to Primer Steel 98 GB/T 2792
to PE 96
Peel Strength
Tmax °C N/cm
to Primer Steel 17 GB/T 2792
to PE 16

服务热线

4001-123-456

微信服务号