Thin Wall Tubing

Environmental / Halogen-Free Tubing

Environmental / Halogen-Free Tubing

  HBDRS-1 is an Environmentally friendly flame-retardant low-temperature heat shrinkable tubing, not including Pb, Cd, Hg, Cr6+, PBDEs, PBBs. It is irradiated cross-linked and complies with ROHS directive and sony SS-00259 requirements.

  WLDRS-1 WLDRS-1 low smoke zero halogen heat shrinkable tubing is a new generation of environment friendly products, widely used in automotive, electronics, military, marine, aerospace and other fields. Because the product uses a new flame retardant system, even if they are combusted with naked flame, the released substances are carbon dioxide and water vapor and do not produce other toxic, corrosive gases. This product has not only maintained oil, wear, insulation, corrosion resistance, flame retardant and toher features of normal heat shrinkable tubing, but also has a low smoke, halogen-free, non-toxic and so on. It not only fully develops the potential of the material, but also meets current market demand for environment friendly products.

Description Performance

Application

  It is applicable to insulation protection and reinforcement of wire cable, electronic wiring harness and a variety of termination ends, connection components, solder joint, and so on.

Specifications

Size (mm)
As supplied
After recovery
Len. (m)
per roll
I.D.(mm) Wall (mm) I.D.(mm) Wall (mm)
1.0/0.5
1.4±0.3
0.20±0.05
0.4±0.1
0.40±0.05
200
1.5/0.75
1.9±0.3
0.20±0.05
0.6±0.1
0.40±0.05
200
2.0/1.0
2.4±0.3
0.25±0.05
0.9±0.1
0.45±0.10
200
2.5/1.25
2.9±0.3
0.25±0.05
1.1±0.1
0.45±0.10
200
3.0/1.5
3.4±0.3
0.25±0.05
1.4±0.1
0.45±0.10
100
3.5/1.75
3.9±0.3
0.25±0.05
1.6±0.1
0.45±0.10
100
4.0/2.0
4.4±0.3
0.25±0.05
1.8±0.1
0.45±0.10
200
4.5/2.0
4.9±0.3
0.35±0.05
1.9±0.1
0.55±0.10
100
5.0/2.5
5.4±0.3
0.35±0.05
2.3±0.2
0.55±0.10
100
6.0/3.0
6.4±0.4
0.35±0.05
2.8±0.2
0.55±0.10
100
7.0/3.5
7.4±0.4
0.35±0.05
3.3±0.2
0.55±0.10
100
8.0/4.0
8.4±0.4
0.35±0.05
3.8±0.2
0.55±0.10
100
9.0/4.5
9.4±0.4
0.35±0.05
4.3±0.2
0.55±0.10
100
10.0/5.0
10.5±0.4
0.35±0.05
4.8±0.2
0.60±0.10
100
11.0/5.5
11.5±0.4
0.35±0.05
5.3±0.2
0.60±0.10
100
12.0/6.0
12.5±0.4
0.35±0.10
5.7±0.3
0.70±0.10
100
13.0/6.5
13.5±0.4
0.35±0.10
6.2±0.3
0.70±0.10
100
14.0/7.0
14.5±0.4
0.35±0.10
6.7±0.3
0.70±0.10
100
15.0/7.5
15.5±0.5
0.35±0.10
7.2±0.3
0.70±0.10
100
16.0/8.0
16.5±0.5
0.35±0.10
7.7±0.3
0.70±0.10
100
17.0/8.5
17.5±0.5
0.35±0.10
8.2±0.3
0.70±0.10
100
18.0/9.0
19.0±0.5
0.40±0.10
8.7±0.3
0.80±0.10
50
20.0/10.0
21.0±0.5
0.50±0.10
9.7±0.3
0.90±0.10
50
22.0/11.0
22.8±0.8
0.50±0.10
10.0±1.0
0.90±0.10
50
25.0/12.5
25.8±0.8
0.50±0.10
11.0±1.0
0.90±0.10
25
28.0/14.0
28.8±0.8
0.50±0.10
13.0±1.0
0.90±0.10
25
30.0/15.0
30.8±0.8
0.50±0.10
14.0±1.0
1.00±0.20
25
35.0/17.5
35.8±0.8
0.50±0.10
16.0±1.0
1.00±0.20
25
40.0/20.0
42.0±1.5
0.50±0.10
19.0±1.0
1.00±0.20
25
50.0/25.0
51.0±1.0
0.50±0.10
24.0±1.0
1.00±0.20
25

(Standard Colors: BLACK, WHITE, RED, YELLOW, BLUE, GREEN, GREY)

Property Condition Performance
Tensile Strength   ≥ 12MPa
Elongation   ≥ 400%
Tensile Strength after Aging 7 Days Air Oven at 158°C ≥ 10MPa
Elongation after Aging ≥ 300%
Deformation Test 131°C, 1h ≤ 25%
Heat Shock Test 250°C, 4h No Cracking
Flexibility Test 7 Days Air Oven at 158° C No Cracking, No Permanent Deformation
Conductor Corrosion No Corrosion
Volume Resistivity   ≥ 1014 Ω·cm
Dielectric Withstand   2.5KV 60s, No Breakdown
Breakdown Voltage   ≥ 10 KV
Dielectric Strength   ≥ 25KV/mm
Dielectric Withstand after Aging 7 Days Air Oven at 158°C 2.5KV 60s, No Breakdown
Breakdown Voltage after Aging ≥ 10 KV
Cold Bend Test -30°C, 1h No Cracking
Longitudinal Change 3 min Air Oven at 200°C ± 5%
Eccentricity   ≤ 30%
Flammability   VW-1
Full Shrinkage Temperature 3 min 90°C

服务热线

4001-123-456

微信服务号